FLYght One

Highlights

Constant UV output
throughout trap lifetime

No hassle of annual
UV-tube replacement

Intrinsically shatter-
proof LEDs

Configured for universal
glue boards

Glueboards not UV
exposed and last longer

Specification

Parameter Measurement with units or type
Area coverage 50 – 80 square meters
Light source Eight UV-A Light Emitting Diodes
Electrical supply 100-290V / 50-60Hz
Power consumption 11 W Maximum
Catch board specifications Universal Glue Board 418 mm X 283 mm
Weight 2.75 kg
Material Metal housing
Degree of protection guarantee IP 21 (Drip proof)
EMC EN5501
Safety Level IEC 60335
LED life 50000 hours
Dimensions (LxWxD) 476 x 237 x 98 mm
Mounting position Wall Mounting
Cable & plug Detachable IEC 320 C5
Service Serviced without special tools

Features

FLYght One is the worlds first UV-LED Insect Light Trap of its kind that relies on UV-A and bioVE+ coating to attract flies.

  • No replacement of LEDs for 50000 hours
  • Sleek, sturdy, lightweight, and compact
  • Unique design conceals glue boards
  • Lowest energy consumption
  • Up to eighty percent of electricity cost saving

A Comparison of FLYght versus Insect Light Traps (ILTs) with UV Tubes

Parameter FLYght 3 tube ILT
Light source 1 X 8 W LEDs 3 X 15W Fluorescent tubes
Light source longevity >5 years 1 year
UV output during the lifespan Constant Reduces with use
Glueboard UV exposure* No High
Trap material Metal Plastic
Sturdiness High Very low
Trapped insect visibility No High
Glass content Glass-free Contains glass tubes
*UV exposure reduces glueboard stickiness, leading to frequent glueboard replacement.

FLYght versus Insect Light Traps (ILTs) with UV Tubes -
A Comparison of Maintenance* Costs

Parameter FLYght 3 tube ILT
Light source LEDs Fluorescent tubes
Bio-VE+ board 750 0
Shatterproof Fluorescent Tubes 0 3140
Total annual maintenance cost 750 3140
Annual savings of FLYght over 2390
Savings of FLYght over 76%
*We assumed both trap types would have the same cost of glueboard change. FLYght UV LEDs last for 50,000 hours and do not need replacement in that period.

FLYght One versus Insect Light Traps (ILTs) with UV Tubes -
A Comparison of Electricity Costs

Parameter FLYght 3 tube ILT
Light source LEDs Fluorescent tubes
Power Rating 9 53
Annual power consumption 88 464
Annual cost of power* 748 3944
Annual savings of FLYght over 3196
Savings of FLYght over 81%
FLYght One cost** recovery 3.5 years
Annual power consumption = Wattage X 24 X 7 X 365 / 1000 Actual power consumed is higher than wattage-based light source efficiency. *Cost of commercial power assumed @INR 8.5 per kWH. **Cost of FLYght One assumed to be INR 11111.11

FAQs

We have designed FLYght to be compact and fit into spaces unobtrusively. FLYght traps are sleeker and smaller than other brands because Pestroniks engineers have intelligently designed the range to maximize UV illumination in limited space.Size of the light trap has no bearing on the glue board catching area as FLYght uses the Universal Glue Board (UGB) that all other fly catchers use.

Pestroniks source LEDs from the world’s best manufacturer and assure you of50,000-hour use life of FLYght LEDs with uniform UV output throughout their life.

The size of FLYght’s glue boards is: 418 mm X 283 mm or the same as any UGB.Please note that glue board manufacturers provide two glue boards with perforated edges. You should gently tear them to separate the two rectangular pieces for your use. Further, you should discard the thin (about 20 mm wide) extra strip between the two glue boards as we have no place for it in FLYght.

FLYght is inherently glass-free as we use LEDs and do not have any glass fixtures in our trap.

We have designed FLYght Traps for use 24X7X365 to attract and trap insects during the day or night.

Yes, we have designed FLYght for placement where you can find an adequatemounting point.Though you can fix FLYght traps on walls you can also place them on shelves or tabletops. In our studies we have found that FLYght traps perform best in attracting insects when you place them 150 cm. (5 ft.) above ground level.

Frequency of glue board replacement depends on the condition of the glue board. You should replace it when it is full of flies or once every forty days. We do not recommend a standard frequency for glue board replacement.UV in light traps ‘cures’ the glue on glue boards making them less sticky. Airborne dust and other particles settle on glue boards to further reduce theirstickiness. Glue board manufacturers recommend that you replace the glue boards no later than 40 days in a FLYght UV LED light trap.In a FLYght trap you place the glue boards without facing the UV source reducing the curing effect UV has on the glue board stickiness. The longer period between two changes of glue boards is another benefit of using FLYght.

Pestroniks gives a three (3) year warranty on the entire FLYght trap range from date you purchase such traps.

Pestroniks assists the customer to have a functional trap by first investigatingthe malfunction. After that Pestroniks shall sending the required component or replace the entire unit depending on the issue.

Pestroniks supplies only one FLYght trap in one box.

Pestroniks supplies sixty (60) FLYght traps on one pallet.

We have extensively tested FLYght with other leading Indian fly catchers thatuse either 15 or 30W UV fluorescent tubes. In our tests, the fly catches of FLYght were either equivalent or slightly higherthan those of the other brands.

Each FLYght box contains 1 FLYght trap, 1 set of two glue boards, 1 power cord, 1 warranty card and 1 User Manual.

Our trap emits UV-A which scientists have found NOT to be harmful to humans for infrequent exposure.The FLYght traps do not emit any harmful UV. All UV emitted in the FLYght traps is UV-A which scientists consider safe.

We request you to check and make sure that the FLYght trap has a functionalpower connection. If it still does not light up, please contact your distributor who shall arrange a spare or trap replacement in coordination with Pestroniks.

No, we recommend you switch on FLYght 24X7 as the trap attracts and trap insects on its glueboards during the day or night.

Instal FLYght taps close to all entry points and close to areas in your factory where you see flies congregate.Please make sure that the traps you place near entry points are not visible from outside as you do not want to attract flies inside.When placing FLYght traps make sure there is no other source of UV or visiblelight next to the trap. You can fix the trap on walls at 150 cm. (5 ft.) height above the floor.

FLYght One is made from powder-coated mild steel and FLYght Duo is made from aluminium

Pestroniks sources LEDs from the world’s best manufacturer of such products. All LEDs of that manufacturer whether ordinary ones or UV LEDs last 50000 hours. The UV LED manufacturer have provided us published data that their UV LEDs uniformly generate UV throughout 50,000 operating hours.We have incorporated a patented bioVE technology in the FLYght range and have chosen UV LEDs to complement such feature.

No, we do not recommend FLYght to monitor fruit flies.Fruit flies have compound eyes that do not have a positive phototactic response to UV like in houseflies. Hence, you will not be able to attract fruit flies in FLYght traps. You should consider using odour attractants to lure and trap fruit flies.

× How can we help you?